The Voytek can run a wide range of wheel sizes – from 27.5+ MTB tires to 26x4.6-inch fat tires.
WHEELIES GALORE!
NARROW Q-FACTOR
Voytek’s narrow Q-factor helps reduce the breeze between your knees! It’s also what makes Voytek ride like a traditional mountain bike.
PLUS-FAT SYSTEM
Two tire sizes. One set of wheels. Plus AND fat, Voytek does that!
TUNING CHIP
The Tuning Chip® system provides 20mm of chainstay length and 4mm of bottom bracket height adjustment, allowing you to fine tune your ride.
TECHNICAL DETAILS
-
Frame Specs
-
Geometry
-
Tires & Rims
| Bottom bracket standard | 83mm (Press Fit 107) |
|---|---|
| Q-factor | 183mm with Race Face Next SL crankset, 188mm with Race Face Aeffect crankset |
| Maximum chainring size | 36T round or 34T oval |
| Front derailleur type | None. 1x only bike. |
| Headset | IS42 upper, IS52 lower |
| Seatpost diameter | Ø30.9mm, accommodates internally routed dropper post |
| Seatpost clamp | Ø34.9mm |
| Front/rear hub standard | 150x15mm thru axle / 177x12mm thru axle |
| Front/rear axle | Ø15x150mm, TP = 1.5, TL = 12mm / Ø12x216mm, TP = 1.5, TL = 14mm |
| Derailleur hanger | Tuning Chip Right Dropout |
| Rear brake (rotor) | 74mm post (160mm native, 180mm max) |
| Front brake (rotor) | 74mm post (160mm native, 180mm max) |
| Fork axle-to-crown | 485mm, suspension corrected to 100-120mm travel forks |
| Fork offset | 51mm |
| Bare frame weight (size M) | 1350g |
| Fork weight (Otso rigid fork) | 650g |
| Tire clearance (frame) | Up to 26" x 4.0" in forward Tuning Chip position, up to 26" x 4.6" in middle and back position |
| Tire clearance (fork) | Up to 26 x 5.4" on 100mm rim |
| 120mm fork note | Using a 120mm suspension fork with slacken the head tube angle by 0.5˚ |
| Frame Size | Small | Medium | Large | X-Large |
| Recommended rider height | 4'9"-5'5" | 5'4-5'9" | 5'8"-6'1" | 6'0"-6'7" |
| Recommended rider inseam | 29"-32" | 31"-33" | 32"-35" | 34"-37" |
| Effective top tube | 585mm | 610mm | 630mm | 645mm |
| Nominal head tube angle (rigid and 100mm suspension fork) | 69° | 69° | 69° | 69° |
| Nominal head tube angle (120mm suspension fork) | 68.5° | 68.5° | 68.5° | 68.5° |
| Tuning Chip induced head/seat tube angle change | ±0.2° | ±0.2° | ±0.2° | ±0.2° |
| Head tube length | 90mm | 115mm | 130mm | 150mm |
| Nominal seat tube angle | 73° | 73° | 73° | 73° |
| Seat tube length | 381mm | 432mm | 483mm | 533mm |
| Bottom bracket drop | 58-62mm | 58-62mm | 58-62mm | 58-62mm |
| Chainstay length | 430-450mm | 430-450mm | 430-450mm | 430-450mm |
| Wheelbase | 1092-1112mm | 1118-1138mm | 1139-1159mm | 1156-1176mm |
| Trail | 85.5mm | 85.5mm | 85.5mm | 85.5mm |
| Fork offset | 51mm | 51mm | 51mm | 51mm |
| Rigid fork axle to crown length | 485mm | 485mm | 485mm | 485mm |
| Stack | 581mm | 602mm | 616mm | 634mm |
| Reach | 407mm | 426mm | 442mm | 451mm |
| Standover | 697mm | 739mm | 780mm | 815mm |
WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For further information go to www.P65Warnings.ca.gov.